Designing for Manufacturability – Part 3: Materials
Material Considerations:
Mechanical: How strong does the material need to be from a mechanical perspective? Is it a product that deals with high loads? Is it something that needs to be metal or can it be a plastic part?
Optical: Is there transparency or optical clarity that is required?
Thermal: Are there high/low temperature heat requirements that need to be met?
Color: Does color matter? Is it a part that is seen every day that has human interface? Or is it hidden inside a machine, so color won’t matter? Engineer Note: A material like a silicone and its base polymer is a milkier translucent appearance, so in theory, you can color silicone to meet almost any pantone color; however, a material like FKM will limit your color options because the base polymer is not translucent.
Electrical: Does the material need to insulate, or does it need to conduct electricity?
Flammability: Is the product exposed to an open flame or high temperature? If so, you would need a material that doesn’t burn.
Panova Real World Example:
We had a client that was designing products and using EPDM foam, because it was readily available; but it severely limited the design of the component parts. Therefore, we spoke with them about the option of molding the product out of gum rubber. Their concern about materials remained, so the team at Panova stuck with the same base polymer they were using with the foam and made additional recommendations on materials that could be colored, handle higher temperatures, and have better chemical resistance. Eventually, we convinced the client to change to a silicone material and it opened a whole new depth of color that the client’s designers and marketing team could consider when developing future models of the product.
Read Other Blog Posts:
Related posts
Top Manufacturing Trends for 2019
Top Manufacturing Trends for 2019 The following trends reflect how manufacturers plan on reaching revenue, operational, digital, and new products/services goals in 2019. IT systems and operational technologies (OT) systems will converge. The merging of IT and...
Designing for Manufacturability – Part 5: Manufacturing Location
Designing for Manufacturability – Part 5: Manufacturing Location Fifteen or twenty years ago, things were a lot different. The world was a lot smaller. Manufacturing offshore was a very foreign thing (no pun intended). The USA was the leader in manufacturing. However,...
Designing for Manufacturability – Part 4: The Process
Designing for Manufacturability – Part 4: The Process Here we are. We have discussed, in the previous weeks, practical considerations; design needs; and materials to consider when designing for manufacturability. In Part 4 of this series, we will be addressing the...
Subscribe to our Blog!
Stay in the loop on the latest Panova news, trends in product development, case studies, and other stories on how we Simply Solve product design challenges. Sign up for new blog posts alerts today!