Designing for Manufacturability – Part 3: Materials
Material Considerations:
Mechanical: How strong does the material need to be from a mechanical perspective? Is it a product that deals with high loads? Is it something that needs to be metal or can it be a plastic part?
Optical: Is there transparency or optical clarity that is required?
Thermal: Are there high/low temperature heat requirements that need to be met?
Color: Does color matter? Is it a part that is seen every day that has human interface? Or is it hidden inside a machine, so color won’t matter? Engineer Note: A material like a silicone and its base polymer is a milkier translucent appearance, so in theory, you can color silicone to meet almost any pantone color; however, a material like FKM will limit your color options because the base polymer is not translucent.
Electrical: Does the material need to insulate, or does it need to conduct electricity?
Flammability: Is the product exposed to an open flame or high temperature? If so, you would need a material that doesn’t burn.
Panova Real World Example:
We had a client that was designing products and using EPDM foam, because it was readily available; but it severely limited the design of the component parts. Therefore, we spoke with them about the option of molding the product out of gum rubber. Their concern about materials remained, so the team at Panova stuck with the same base polymer they were using with the foam and made additional recommendations on materials that could be colored, handle higher temperatures, and have better chemical resistance. Eventually, we convinced the client to change to a silicone material and it opened a whole new depth of color that the client’s designers and marketing team could consider when developing future models of the product.
Read Other Blog Posts:
Related posts
Designing for Manufacturability – Part 2: Design Needs
Designing for Manufacturability – Part 2: Design Needs In Part 1 of our Designing for Manufacturability Blog Series we discussed the practical considerations to keep in mind when designing a product. In today’s blog, we will begin our conversation on design...
Designing for Manufacturability – Part 1: Practical Considerations
Designing for Manufacturability – Part 1: Practical Considerations When designing parts for manufacturability there are a lot of factors to consider. In this multi-part blog series, we will explore these factors, highlight the steps you need to take to recognize a...
Upcoming Webinar: Designing for Manufacturability – Can Your Design Really Be Produced?
Designing for Manufacturability – Can Your Design Really Be Produced? There are a lot of practical considerations when designing parts for manufacturability. Join this webinar to learn about the necessary factors to consider in relation to materials, cost,...
Subscribe to our Blog!
Stay in the loop on the latest Panova news, trends in product development, case studies, and other stories on how we Simply Solve product design challenges. Sign up for new blog posts alerts today!