Designing for Manufacturability – Part 1: Practical Considerations
It is our goal to have our readers walk away with a true understanding of how to ensure production efficiency and quality while taking care of potential problems in the design itself.
Designing for manufacturability (DFM) is the general engineering practice of designing products in such a way that they are easy to manufacture. Ultimately it comes down to designing the best product at the lowest cost. To do this successfully it is important for all involved to be aware of practical considerations.
First off, you need to understand the product’s real need.
- How is the product going to be used?
- What is the purpose of the product?
- What is the environment that the product is going to be used in?
Next, you must acknowledge the product’s constraints.
- Are there constraints around cost?
- Are there constraints around time?
- Are there regulations, either industry or federal?
- What is the capacity or capability of the manufacturing facility or the client?
Lastly, what are the specifications?
- What are the limitations of certain materials?
- What are the limitations of the production location?
- Is there any history related to the product design that needs to be considered?
While taking all of this into account, it is imperative that you limit over constraints. Over constraints are over specifications that include, but are not limited to:
- Having tolerances that are too tight.
- Requiring a material that isn’t necessary for the product.
Take some time to review this information then get ready for Part 2 of our Designing for Manufacturability series where we will dive into design considerations as they relate to a product’s needs.
Ready to learn more, right now? Download the full “Designing for Manufacturability – Can Your Design Really Be Produced” training here.
Read Other Blog Posts:
Related posts
Top Manufacturing Trends for 2019
Top Manufacturing Trends for 2019 The following trends reflect how manufacturers plan on reaching revenue, operational, digital, and new products/services goals in 2019. IT systems and operational technologies (OT) systems will converge. The merging of IT and...
Designing for Manufacturability – Part 5: Manufacturing Location
Designing for Manufacturability – Part 5: Manufacturing Location Fifteen or twenty years ago, things were a lot different. The world was a lot smaller. Manufacturing offshore was a very foreign thing (no pun intended). The USA was the leader in manufacturing. However,...
Designing for Manufacturability – Part 4: The Process
Designing for Manufacturability – Part 4: The Process Here we are. We have discussed, in the previous weeks, practical considerations; design needs; and materials to consider when designing for manufacturability. In Part 4 of this series, we will be addressing the...
Subscribe to our Blog!
Stay in the loop on the latest Panova news, trends in product development, case studies, and other stories on how we Simply Solve product design challenges. Sign up for new blog posts alerts today!